logologo

Language
Search...

logo

Products

Products

Home > Products > JL Bluetooth Chips > Bluetooth Chip for Earphones

Bluetooth Chip for Earphones AC6969A

32-bit DSP supports hardware Float PointUnit (FPU). Up to 160MHz programmable processor. 64Vectored interrupts.

Product Features

  • CPU

    32-bit DSP supports hardware Float PointUnit (FPU).

    Up to 160MHz programmable processor.

    64Vectored interrupts.

    4 Levels interrupt priority.

  • DSP Audio Processing

    SBC, AAC Audio decodes supported for BTaudio.

    mSBC voice codecs supported for BT phone.

    Supports MP2, MP3, WMA, APE, FLAC,AAC, MP4, M4A, WAV, AIF, AIFC audiodecoding.

    Packet Loss Concealment (PLC) for voiceprocessing.

    Acoustic echo cancellation/suppression(AEC,AES).

    Single/Dual MIC Environmental NoiseCancellation (ENC).

    Multi-band DRC limiter.

    10-band EQ configuration for voice Effects.

  • Audio Codec

    Two channels 16-bit DAC, SNR >= 95dB.

    One channels 16-bit ADC , SNR >= 90dB.

    Sampling rates of 8KHz/11.025KHz/16KHz/22.05KHz/24KHz/32KHz/44.1KHz/48KHz are supported.

    One analog MIC amplifier, build-in MIC bias generator.

    Supports two PDM digital MIC inputs.

    Two channels Mono analog MUX.

    Supports cap-less, single-ended, anddifferential mode at the DAC path.

    Supports 16ohm and 32ohm Speaker loading.

  • Bluetooth

    Compliant with Bluetooth V5.1+BR+EDR+BLE specification.

    Meet class1 class2 and class3 transmittingpower requirement.

    Support GFSK and  π/4 DQPSK all paket types.

    Provides +6dbm transmitting power.

    receiver with -90dBm sensitivity.

    Fast AGC for enhanced dynamic range.

    Supportsa2dp/avctp/avdtp/avrcp/hfp/spp/smp/att/gap/gatt/rfcomm/sdp/l2cap profile.

  • Peripherals

    One full speed USB 2.0 OTG controller.

    Six multi-function 32-bit timers, supportcapture and PWM mode.

    Three full-duplex basic UART, UART0 andUART1 supports DMA mode.

    Three 16-bit PWM generator for motordriving.

    One hardware IIC interface supports host anddevice mode.

    10-bit ADC for analog sampling.

    External wake up/interrupt on all GPIOs.

  • PMU

    Low voltage LDO for internal digital and analog circuit supply.

    3uA current consumption in the soft-off mode.

    Built-in LDO for the core, I/O, Bluetooth and flash.

    VBAT is 2.2V to 5.5V.

    VDDIO is 2.2V to 3.6V.

  • Packages

    SOP16.

  • Temperature

    Operating temperature: -20℃ to +70℃.

    Storage temperature: -65℃ to +150℃.

  • Applications

    Bluetooth TWS Earphone.

Pin Assignment

Bluetooth Chip for Earphones AC6969A

Pin Description

Bluetooth Chip for Earphones AC6969A

How to Order

You can get your Bluetooth Chip for Earphones AC6969A solution by flling out the form below and we will contact you immediately.

Want to turn your idea into reality Contact AXTEK Support
Copyright © 2022 AXTEK Technology Co., Ltd. All Rights Reserved. | Sitemap

Contact

Copyright © 2022 AXTEK Technology Co., Ltd. All Rights Reserved. | Sitemap
Online

Email

Message
TOP