Introduction:

The PY32T020-B series are based on a 32-bit ARM® Cortex®-M0+ core and operates at up to 48 MHzwith a wide voltage range. It integrates up to 32 KB Flash and 4 KB SRAM, available in multiple packageoptions.The PY32T020-B series integrate I2C, SPI, UART and other communication peripherals. It has one 12-bitADC, two 16-bit timers, two comparators and 26-channel low-power dual-mode capacitive touch circuit (inStop mode).The PY32T020-B microcontrollers operate across a temperature range of -40 to 105 °C and a standardvoltage range of 1.8 to 5.5 V. provides Sleep and Stop low power operating modes, which can meet differentlow-power applications.The PY32T020-B series feature excellent touch key controller. Coupled with its outstanding anti-interference performance, it can be adapted in various solutions. Its applications span smart appliances, controllers,handheld equipment,PC peripherals,gaming,GPS platforms, and industrial systems.

Features

 Core

― ARM® 32-bit Cortex®-M0+ CPU

― Frequency up to 48 MHz

 Memories

― Maximum 32 KB Flash memory

— Maximum 4 KB SRAM

 Clock management

— 24/48 MHz High-speed internal RC oscillator (HSI)

— 32.768 kHz Low-speed internal RC oscillator (LSI)

— 4 - 8 MHz High-speed external crystal oscillator (HSE)

— 32.768 kHz Low-speed external crystal oscillator (LSE)

— External clock input

 Power management and reset

― Operating voltage: 1.8 - 5.5 V

— Low power modes: Sleep/Stop/Deep_stop/Hibernate

― Power-on/power-down reset (POR/PDR)

― Brown-out reset (BOR)

 General-purpose input and output (I/O)

― Up to 26 I/Os, all available as external interrupts

— 5 GPIOs supporting high sink current (configurable as 80mA/60mA/40mA/20mA) for driving common-cathode LED digital tubes

— 8 GPIOs as LED SEG with constant-current drive

— All GPIOs can serve as LCD COM with 1/2 Bias Touch Key

—High-sensitivity for non-contact touch

—10 V dynamic CS test-passed anti-interference mode

—26 touch channels with derived functions

—Low-power touch mode with multi-touch wakeupcapability (<8 μA system current consumption)

 1 x 12-bit ADC

— Up to 10 external channels and 3 internal channels

— Voltage reference options: embedded 0.6V/1.5 V/2.048 V/2.5 V and VCC

 Timers

— 1 x 16-bit advanced-control timer (TIM1)

— 1 x 16-bit general-purpose timer (TIM14)

― 1 x independent watchdog timer (IWDG)

― 1 x SysTick timer

 RTC

 Communication interfaces

— 1 x serial peripheral interface (SPI）

— 3 x universal asynchronous receiver transmitters (UARTs)

— 1 x I²C interface, supporting Standard mode (100 kHz), Fast mode (400 kHz) and Fast mode plus (1 MHz)

 Hardware CRC-32 module

 2 x comparators

 Unique UID

 Serial wire debug (SWD)

 Operating temperature - 40 - 105 °C

 Packages: QFN28, TSSOP28, SOP28, SOP20, SOP16 and SOP8