GENERAL DESCRIPTION：

The  ICM‐20689  is  a  6‐axis  MotionTracking  device  that combines  a  3‐axis  gyroscope,  3-axis  accelerometer,  and  a Digital Motion Processor™ (DMP) in a small 4x4x0.9 mm (24‐pin QFN) package. 

 Large  4K-byte  FIFO  to  reduce  traffic  on  the  serial  bus  interface, and reduce power consumption by allowing the 

system processor to burst read sensor data and then go into a low‐power mode   

 Gyroscope  programmable  FSR  of  ±250dps,  ±500dps, ±1000dps and ±2000dps  

 Accelerometer with Programmable FSR of ±2g, ±4g, ±8g and ±16g 

 EIS FSYNC support 

The ICM‐20689 includes on‐chip 16‐bit ADCs, programmable digital  filters,  an  embedded  temperature  sensor,  and programmable  interrupts.  The  device  features  an  operating voltage range down to 1.71 V. Communication ports include 

I²C and high speed SPI at 8 MHz.  

FEATURES:

 User‐programmable interrupts 

 Wake‐on‐motion  interrupt for  low power operation of applications processor 

 4K‐byte  FIFO  buffer  enables  the  applications processor to read the data in bursts 

 On‐Chip 16‐bit ADCs and Programmable Filters 

 Host interface: 8 MHz SPI or 400 kHz Fast Mode I²C

 Digital‐output temperature sensor 

 VDD operating range of 1.71 V to 3.45 V 

 MEMS structure hermetically sealed  and bonded  at wafer level 

 RoHS and Green compliant

APPLICATIONS: 

 Mobile phones and tablets 

 Drones 

 Motion‐based game controllers 

 3D remote controls for Internet connected DTVs and set top boxes, 3D mice 

 Wearable sensors for health, fitness and sports