Description:
The SN65DP141 is an asynchronous, protocolagnostic, low latency, four-channel linear equalizer optimized for use up to 12 Gbps and compensates for losses due to board traces and cables.The device is transparent to DisplayPort (DP) link training such a way that a DP source and a sink can perform effective link training overcoming traditional aux snooping re-drivers’ shortcomings. Additionally, the device is position independent. It can be placed
inside source, cable or sink effectively providing a negative loss component to the overall link budget. Linear equalization inside SN65DP141 also increases link margin when used with a receiver implementing Decision Feedback Equalization (DFE). SN65DP141 allows independent channel control for equalization, gain, dynamic range using both I2C and
GPIO configurations.
Features:
• Supports VESA DisplayPort 1.4a,2.0, and eDP 1.4
• Quad channel linear redriver supporting data ratesup to 12 Gbps including DisplayPort RBR, HBR,HBR2, HBR3, and UHBR10
• Protocol agnostic
• Transparent to DP link training
• Position independent on the link suitable forsource, sink, and cable applications
• 15-dB analog equalization at 6 GHz
• Output linear dynamic range: 1200 mV
• Bandwidth: >20 GHz
• Better than 16-dB return loss at 6 GHz
• 2.5-V or 3.3-V ±5% single power supply option
• Low power consumption with 80 mW per channelat 2.5 V VCC
• GPIO or I2C control
Applications:
• Tablets
• Notebooks
• Desktops
• Docking stations
You can get your Texas Instruments SN65DP141RLJR Datesheet solution by flling out the form below and we will contact you immediately.