Product Features

• Memory

  Flash: 8Kx16

  Universal RAM: 256x8

  Dedicated RAM for built-in touchfeature: 400x8

• 8 level stack buffer

• Clean instructions (68 instructions)

• look-up table

• built-in WDT timer

• built-in low voltage detection circuit

• Interrupt source

  3 timer interrupt

  Interrupt for change in electrical levelRB port

  Other peripherals interrupt

  16-bit timer: TIMER1 which supportsexternal

  32.768kHz crystal oscillator as timerclock source

• Capture, compare and PWM mod (CCP)

  10-bit PWM precision

  2 PWM circuit with configurable andadjustable period and duty cycle

  Able to configurate betweenRB4/RB3 or RC6/RC7

• built-in 128-byte EEPROM

  Can re-write/erase up to 100000times

• built-in touch button detection mod, noneed for external touch capacitor

  Can pass dynamic/static 10V EMCtest

  Adjustable touch sensitivity

  All pins can be configurated to touchchannel

• Working voltage: 2.6V~5.5V@16MHz 2.0V~5.5V@8MHz

• Working temperature: -40℃~85℃

• Multiple ways of oscillation

  Internal RC: design frequency of 8MHz/16MHz

  External XT: up to 16MHz

• Instructions period (single instruction or doubleinstructions)

• built-in LED driver mod

  Support up to 11 segments, 8 bits

  Large driving current up to 150mA at COM port

  Adjustable current of 2-30mA at SEG port

• built-in LCD1/2 Bias COM driver mod

  Support up to 8 COM port

  COM port driver current selection

• built-in MSSP communication mod (SPI/ I2C)

  I2C supports master control/slave mode (7-bitaddressing)

  I2C slave mode supports broadcast call

  SPI supports master/slave mode

• built-in 2 USART communication mod

  Supports synchronous master/slave mode andasynchronous duplex mode

  serial port 1 can be configurated betweenRB4/RB3 or RC6/RC7

• High precision 12-bit ADC

  Built-in high precision 1.2V reference voltage

  ±1.5% @VDD=2.5V~5.5V TA=25℃

  ±2% @VDD=2.5V~5.5V TA=-40℃~85℃

• built-in LVD mod

  Choice of voltage:

  2.2V/2.4V/2.7V/3.0V/3.3V/3.7V/4.0V/4.3V