logologo

Language
Search...

logo

Products

Products

Home > Products > Featured Manufacturers > Others

ISSI IS21TF08G-JCLI Datesheet

The Microchip PIC18F46K22-I/PT is a high-performance 8-bit microcontroller featuring a RISC CPU optimized for C compilers, supporting up to 16 MIPS operation with a 16-bit instruction width and 8-bit data path. It provides up to 64 KB linear program memory, 3896 bytes of linear data memory, and 1024 bytes of data EEPROM. The device includes a precision internal 16 MHz oscillator (calibrated to ±1%) with PLL for up to 64 MHz operation, eliminating external components. Analog features include a 10-bit ADC with up to 30 external channels, two rail-to-rail analog comparators, a 5-bit DAC, and a Charge Time Measurement Unit (CTMU) for capacitive touch sensing. The eXtreme Low-Power (XLP) technology enables Sleep mode current down to 20 nA, making it ideal for battery-powered and power-sensitive applications. Additional features include self-programmability, HLVD, programmable BOR, extended WDT, ICSP, and ICD support. Peripherals include up to 35 I/O pins, two CCP modules, three ECCP modules

GENERAL DESCRIPTION:

ISSI eMMC products follow the JEDEC eMMC 5.1 standard. It is ideal for embedded storage solutions for Industrialapplication and automotive application, which require high performance across a wide range of operating temperatures.eMMC encloses the pSLC Mode NAND and eMMC controller inside as one JEDEC standard package, providing a standardinterface to the host. The eMMC controller directly manages NAND flash, including ECC, wear-leveling, IOPS optimizationand read sensing.


FEATURES:

• Packaged NAND flash memory with eMMC 5.1 interface- IS21/22TF08G: 8Gigabyte

• Compliant with eMMC Specification Ver.4.3, 4.4, 4.41,4.5, 4.51, 5.0, 5.1

• Device can be converted to eMMC 4.3, 4.41, 4.51, 5.0 via initializing

• Bus mode

- High-speed eMMC protocol

- Clock frequency: 0-200MHz.

- Ten-wire bus (clock, 1 bit command, 8 bit data bus) and a hardware reset.

• Supports three different data bus widths : 1 bit(default), 4 bits, 8 bits

- Data transfer rate: up to 52Mbyte/s (using 8 parallel data lines at 52 MHz)

- Single data rate : up to 200Mbyte/s @ 200MHz (HS200)

- Dual data rate : up to 400Mbyte/s @ 200MHz (HS400)

• Operating voltage range :- VCCQ = 1.8 V/3.3 V (Automotive A2 Grade only supports 1.8V VCCQ)- VCC = 2.7 – 3.6V

• Error free memory access

- Internal error correction code (ECC) to protect data communication

- Internal enhanced data management algorithm

- Solid protection from sudden power failure, safe-update operations for data content

• Security

- Support secure erase and trim commands- Enhanced write protection with permanent and partial protection options

• Key Features :

- HS400, Field Firmware Update (FFU), Power Off Notification, Pre EOL information, Enhanced Device Life time,Optimal Size

• eMMC 5.1 Features:

- Command Queuing, Enhanced Strobe, Cache Flushing Report, BKOPS Control, Cache Barrier, RPMBThroughput Improve, Secure Write Protection.

• Temperature range

- Industrial Grade (I): -40 ℃ ~ 85 ℃

- Automotive Grade (A1): -40 ℃ ~ 85 ℃

- Automotive Grade (A2): -40 ℃ ~ 105 ℃ (The Surface Temperature of Tc cannot be over 115 ℃)

• Package- 153 FBGA (11.5mm x 13mm x 1.0mm)- 100 FBGA (14.0mm x 18.0mm x 1.4mm)


How to Order

You can get your ISSI IS21TF08G-JCLI Datesheet solution by flling out the form below and we will contact you immediately.

Want to turn your idea into reality Contact AXTEK Support
Copyright © 2022 AXTEK Technology Co., Ltd. All Rights Reserved. | Sitemap

Contact

Copyright © 2022 AXTEK Technology Co., Ltd. All Rights Reserved. | Sitemap
Online

Email

Message
TOP